Recurring Welding Tasks (Job 1-100) - EWM T5.01-DC Comfort 3.0 Operating Instructions Manual

Functional characteristics
TIG welding
5.1.4.1

Recurring welding tasks (JOB 1-100)

The user has 100 additional memory locations at their disposal to save recurring or different welding
tasks on a permanent basis. To do so, simply select the required memory location (JOB 1-100) and set
the welding task as described previously.
With the JOB manager > see 5.4 chapter, welding tasks can be copied to any preset or reset to the fac-
tory settings.
The desired JOB can also be assigned to a quick access button (favourites button) > see 5.3 chapter.
Switching a JOB is only possible if no welding current flows. Up-slope and down-slope times can be set
individually for latched and non-latched operation.
Selection
When one or more of the recurring welding tasks has been selected, the JOB signal light comes on.
26
Cel
Figure 5-4
4s
099-00T501-EW501
1.8.2022