Table of Contents
Advertisement
5.1.4
Manual ignition setting
When the special ignition is selected, the dependency of the minimum current limits on the electrode dia-
meter is disabled. The ignition energy can now be set independently with the parameters ignition current
and ignition time
current differs in the setting variants
•
In the variant
•
In the variant
The parameters for manual setting of the ignition energy are selected and enabled with "left stop" when
setting the electrode diameter (minimum value >
099-00T501-EW501
1.8.2022
. The ignition time is set absolutely in milliseconds. The setting of the ignition
and
, the ignition current is set absolutely in ampere [A].
, the ignition current is set as a percentage of the set main current.
Functional characteristics
.
>
).
Figure 5-3
TIG welding
4s
25
Advertisement
Table of Contents
Need help?
Do you have a question about the T5.01-DC Comfort 3.0 and is the answer not in the manual?
Questions and answers