Setting Advanced Welding Parameters (Expert Menu); Changing Basic Settings (Machine Configuration Menu); Lock Function - EWM T5.01-DC Comfort 3.0 Operating Instructions Manual

Machine control – Operating elements
Operating the machine control
4.3.4

Setting advanced welding parameters (Expert menu)

The Expert menu contains functions and parameters that cannot be set directly on the machine control or
for which regular settings are not required. The number and display of these parameters depend on the
previously selected welding procedure or functions.
To select, press and hold the click wheel (> 2 s). Select the appropriate parameter / menu item by turning
(navigating) and pressing (confirming) the click wheel.
4.3.5

Changing basic settings (machine configuration menu)

The basic welding system functions can be adjusted in the machine configuration menu. Only experi-
enced users should change the settings > see 5.9 chapter.
4.3.6

Lock function

The lock function protects against accidental changes to the machine settings. All operating elements are
deactivated when the function is activated and the signal light of the lock function is on. Press and hold
(> 2 s) the push-button
22
to enable or disable the function.
099-00T501-EW501
1.8.2022