Settings - Strong SRT 7501 User Manual

PIN-Code Change:
Old PIN-Code:
New PIN-Code:
Confirm new PIN:
After confirming the new PIN-Code, the menu is closed, otherwise press
NOTE:

7.3 Settings

Press MENU and select SETTINGS with t u. The following submenus are available: Language, System
Settings, Time Settings, Timer, and STB Information.
7.3.1 Language
In this menu you can set the preferred languages for the menu, audio and subtitles. Use the pq
buttons to highlight the desired item and press t u to change the settings.
OSD Language:
1st Audio Language:
2nd Audio Language:
Subtitles Display:
Subtitle language:
Volume settings:
NOTE:
18
protection or EPG-based age restrictions, you must enter your PIN-Code
according to your settings.
Press OK to open the options listed below.
Use 0 ~ 9 to enter the old PIN-Code.
Use 0 ~ 9 to enter the new PIN-Code.
Press the 0~9 buttons to confirm your new PIN-Code.
Parental Control only works on channels which support EPG or EPG based
age restrictions, only then will you be prompted to enter your PIN-Code
(DEFAULT PIN: 0000). Otherwise, you can also lock the required channels as
described in the previous chapter 7.2.1 TV Channel Manager.
Select the desired language, and select Deutsch and English.
Set the 1st audio language here. If it is available, the receiver automatically
selects it. On the German-language channels the original language track
might be available and can also be set. In certain cases also acoustic image
descriptions can be selected.
Set the 2nd audio language here, if the 1st is not available.
Select between On or Off. If Subtitle Display is set to On, Subtitles will be
displayed automatically in the language selected below (if broadcast/
supported by the operator). If you do not want the receiver to display
subtitles, keep the setting Off. Please note that some events are broadcastwd
with fixed subtitles (fixed in the video signal integrated). These subtitles can
not be swtiched off.
Set the language for the subtitles, if available, subtitles are displayed in the
selected language.
Here, you can set whether channels should use a unite volume control or if
this should be controlled seperately Per Service. Try to find out which setting
works best for you.
Please note that DVB or HoH subtitles are not supported by all service
providers. If available, subtitles can also be accessed via Teletext.
to exit.