Multimedia - Strong SRT 7501 User Manual

7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings:
Timezone:
Summer Time:
7.3.4 Timer
Use the timer function to switch to a selected programme. Press OK to open a timer.
Timer Mode:
Timer Action:
Channel:
Start Date:
Start Time:
End Time:
Standby after timer:
After finishing all settings, press pq to select Save and press OK.
NOTE:
7.3.5 Receiver Information
The menu contains information about the hardware and software versions of the receiver.
Amongst others you will find the serial number, model name, loader version and the CSSN number
of the receiver, which is also required for the registration and payment of pay TV channels. The CSSN
number can also be found on the bottom of the receiver or on the packaging. If you need to contact our
support, please keep this information as it can help you process your request.

7.4 Multimedia

In this menu you can decide whether to play movies, music or look at pictures.
Use the pq buttons to select the appropriate menu, and then press ОK to switch to one of the
submenus. In all multimedia menus, you can use the multimedia buttons as usual.
7.4.1 Movies
Only supported movies can be played in this menu. Use the pq t u and P +/P- buttons to navigate
and select, or press OK.
Signs and symbols:
20
Select Auto to automatically synchronize the time and time zone, or Manual
to set the time manually.
The time zone can be adjusted in manual Time Settings.
This setting is only available when you set the time to Manual.
When the winter time is changing to Summer Time, it is necessary to switch
Summer Time to ON.
Use t u to select Once, Monday-Friday, Daily, Weekly or Monthly, factory
setting is set to Off.
Switch On is set here to switch the receiver on at the desired time.
Press OK to open the channel list and press pq or P +/- to select the desired
channel and press OK to accept.
Enter the selected date with 0 ~ 9.
Enter the selected starting time with 0 ~ 9.
Enter the selected end of the recording with 0 ~ 9.
Set here whether the receiver should always be in standby after the timer has
expired or whether it should always remain switched on.
The setting for Standby after timer applies to all timers.