Strong SRT 7501 User Manual page 19

7.1.3 Channel Search
In this menu, you can perform an automatic, network or transponder search. You can also search for
channels on all installed satellites. Use the pq buttons to highlight the desired item and use t u to
change the settings.
Satellite:
Transponder:
Channel type
Scan mode
Search for
One Satellite:
Selected Satellites:
NIT Table:
HD Austria Senderliste laden:
One Transponder:
After choosing the desired settings, press OK to start the channel search, or press
without scanning.
* Only available if more than one satellite has been setup.
NOTE:
NOTE:
Here you will find a list of satellites, only select a satellite/s which is available in
your installation or have been configured previously.
If this option is marked, the name and position can be changed using the
RED Rename Satellite button. To do this use pq and t u, on the shown
keyboard, to navigate.
Use the t u buttons to switch between the transponders of the selected
satellite. You can also press OK to list them. Use pq or P+/P- to scroll
through the list. Confirm your selection with OK. Press the RED button to Edit
TP, the GREEN to Add TP or YELLOW to Delete Current TP. Details can be found
in chapter 7.1.3.1 Edit, add or delete transponders
Use t u to select the channels you'd like to search for: All, only Free-to-air or
Encrypted channels.
TV & Radio searches for TV and radio channels, TV only for TV channels and
radio only for radio channels.
Use t u to select the search type to be performed. You can choose between
the following options:
Searching on the selected satellite
Search for all installed satellites. * This option displays a menu for selecting
the installed satellites. After selection, please use the RED Search key to
continue the search.
NIT Scan on the selected satellite.
This option allows you to install the HD Austria channel list. In this case,
previously installed channels are kept and are listed correspondingly. TV
or Radio channels which are not included in the HD Austria channel list are
sorted at channel numbers starting with 4000 or 6000 and only such can still
be edited.
Search on the transponder selected in above
Network Data/NIT Table (Network Identification Table): This function allows
you to search the NIT data of the corresponding satellite to receive newly
released channels. Please consider that in contrast to Astra 19.2 and HotBird
13.0 some satellites do not have this database respectively can only support
it partly. If you have any questions, please contact your dealer or the service.
If you want to add or edit parameters for a transponder, we recommend
verifying it by consulting websites like: www.lyngsat.com; www.kingsofsat.
net or you can refer to professional journals.
to exit the menu
15