Strong SRT 7501 User Manual page 21

The Move functions allows you to move one or multiple channels. In the Program List, select the
channel(s) you want to move with OK. They will appear one by one in the Selected column and you can
already define the sequence with the appropriate selection(s). After you are finished with the selection
of channels to be moved, use pq and P+/P- to select the new position in the Program List where the
channels should be moved to and press the YELLOW Move key. The channels will be inserted beneath
the selected position.
Create Favourite Lists
Select FAV and press OK to create favourite lists. On the left, below the TV image, the groups, which are
available, will be displayed. Use pq to select a group. If you press OK, a keyboard appears and you can
rename the group. Within the keyboard use the pq and t u buttons to navigate and OK to enter the
desired character/number. Use RED to delete the existing name and GREEN to switch between capital
and small letters. Use P+/P- to switch to the special characters.
Once finished, select Save and press OK. Then go to the right via u button, where your usual program
list is displayed. Use FAV to add a channel to the selected favourite list and press OK to switch to this
channel. When you go to the centre, you can use FAV to remove the selected channel from this favourite
list (only from the FAV list). You can also activate the
next to the channel. Now move it to the desired position by using pq and confirm the new position by
pressing the YELLOW button again. In this case, channels can only be moved 1 by 1.
To exit from a menu, press either
exit the menu by /MENU, you will be asked to confirm the changes. This applies to all changes you
have made.
NOTE:
7.2.2 Radio Channel Manager
Please refer to the previous chapter TV Channel Manager to find out how it works in radio mode. The only
difference is that no picture is available.
7.2.3 Electronic TV Program (EPG)
For details on the EPG please refer to chapter 6.7 EPG (Electronic Programme Guide).
7.2.4 Parental Control
In this menu, you can make a PIN-Code Change, set a Menu lock and Program Lock Age.
To enter this menu, you need to enter the PIN-Code (DEFAULT PIN: 0000) first. Use the pq buttons to
select the desired setting or press OK to list the options. Use the t u buttons to change the setting.
Menu lock:
Program Lock Age:
to go back one step, or MENU to go directly to TV mode. When you
When using the "HD Austria Senderliste" associated channels cannot be
edited (deleted, moved or renamed). If you have made a recent or other
channel search, TV or radio channels which are not included in the "HD
Austria Senderliste" are ranked above channel number 4000 or 6000 and
can still be edited.
Use t u to select ON or OFF, depending on whether you want to use this
function. It allows you to block access to the sender management and the
complete installation menu.
Use t u to choose between the following settings: Off, 12 years, 14 years
16 years or 18 years. As soon as you switch to channels which support child
function by the YELLOW button. A
will appear
17