Set Up And Operation; Filter Frame Retaining Clip; Included Lenses - SHOWTEC Studio Beam 575 Manual

Studio Beam 575

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.

Filter frame retaining clip

01) Release the retaining clip by pushing it sideways. The clip will open.
02) Insert the filter frame into the bracket.
03) Press the retaining clip down to lock in order to secure the filter frame in position.
04) Make sure the filter frame is locked in position with the retaining clip before hanging the Studio
Beam.

Included lenses

Ordercode: 30657/30658
10
Fig. 07
Fig. 08