Save the carton and all packing materials. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Pixel Bar 12 MKII • 2 brackets and screws • 2 adjustable brackets •...
Page 4
For replacement, use fuses of same type and rating only. The user is responsible for correct positioning and operating of the Pixel Bar 12 MKII. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
When rigging, derigging or servicing the Pixel Bar 12 MKII, always make sure, that the area below the installation place is blocked and staying in the area is forbidden. The Pixel Bar 12 MKII can be placed on a flat stage floor or mounted to any kind of truss by a clamp. Ordercode: 41304...
Pixel Bar 12 MKII Connection with the mains Connect the device to the mains with the power plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER...
Features The Showtec Pixel Bar 12 MKII is a powerful and cost effective batten. It is equipped with 12 x 3-in-1 RGB LEDs which gives a professional look and perfect color-mixing. The Pixel Bar 12 MKII can be controlled by DMX and also has a built-in sound to light function for stand alone applications.
08) IEC Power In + Fuse T2L / 250V Installation Remove all packing materials from the Pixel Bar 12 MKII. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
Pixel Bar 12 MKII One Pixel Bar (Built-in programs, Auto Run) 01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141).
Pixel Bar 12 MKII Multiple Pixel Bars (DMX512 Mode) 01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket.
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). • DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30. The Pixel Bar 12 MKII can be operated with a controller in control mode or without the controller in stand- alone mode. Ordercode: 41304...
Pixel Bar 12 MKII Control Panel A. LED Display B. Mode button C. Setup Button D. Up Button E. Down Button Fig. 05 DMX Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.)
Settings Built-in Programs Auto Run DMX mode The Pixel Bar 12 MKII will only show its version number at start-up ! 1. Master/slave mode Master 01) The default setting for this device is master. 02) Only one fixture can be the master.
Pixel Bar 12 MKII 2. Sound control Mode With this menu you can set the sensitivity for the Pixel Bar 12 MKII. 01) Press the Mode button on the device, until the display shows 02) Press the Setup button to open the submenu: 03) You can scroll through these options with the Setup button.
05) Press the Up and Down buttons to set the speed and strobe value between 0-99 or SPFL. 6. Auto Run Program With this menu you can set the Auto run mode of the Pixel Bar 12 MKII. 01) Press the Mode button on the device, until the display shows 02) The Pixel Bar will automatically start with its built-in program.
Pixel Bar 12 MKII 7. DMX Mode With this menu you can set the DMX address and choose a DMX configuration. 01) Press the Mode button, until the display shows 02) You can choose 512 different DMX addresses. 03) Press the Up and Down buttons to select the required address between 04) Press the Setup button again to choose a DMX configuration.
Pixel Bar 12 MKII DMX Channels 3 DMX Channels Channel 1 – Red Dimmer intensity 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green Dimmer intensity 0-255 Gradual adjustment Green from 0 – 100% Channel 3 – Blue Dimmer intensity 0-255 Gradual adjustment Blue from 0 –...
Pixel Bar 12 MKII Channel 4 – Red Dimmer intensity section 2 0-255 Gradual adjustment Red from 0 – 100% Channel 5– Green Dimmer intensity section 2 0-255 Gradual adjustment Green from 0 – 100% Channel 6 – Blue Dimmer intensity section 2 0-255 Gradual adjustment Blue from 0 –...
Pixel Bar 12 MKII 133-139 Program 19 140-146 Program 20 147-153 Program 21 154-160 Program 22 161-167 Program 23 168-174 Program 24 175-181 Program 25 182-188 Program 26 189-195 Program 27 196-202 Program 28 203-209 Program 29 210-216 Program 30...
Page 21
Pixel Bar 12 MKII Channel 4 – Red Dimmer intensity section 2 0-255 Gradual adjustment Red from 0 – 100% Channel 5 – Green Dimmer intensity section 2 0-255 Gradual adjustment Green from 0 – 100% Channel 6 – Blue Dimmer intensity section 2 0-255 Gradual adjustment Blue from 0 –...
Pixel Bar 12 MKII Channel 9– Blue Dimmer intensity section 3 0-255 Gradual adjustment Blue from 0 – 100% Channel 10 – Red Dimmer intensity section 4 0-255 Gradual adjustment Red from 0 – 100% Channel 11 – Green Dimmer intensity section 4 0-255 Gradual adjustment Green from 0 –...
Page 24
Pixel Bar 12 MKII Channel 5– Green Dimmer intensity section 2 0-255 Gradual adjustment Green from 0 – 100% Channel 6 – Blue Dimmer intensity section 2 0-255 Gradual adjustment Blue from 0 – 100% Channel 7 – Red Dimmer intensity section 3 0-255 Gradual adjustment Red from 0 –...
Page 25
Pixel Bar 12 MKII Channel 13 – Red Dimmer intensity section 5 0-255 Gradual adjustment Red from 0 – 100% Channel 14– Green Dimmer intensity section 5 0-255 Gradual adjustment Green from 0 – 100% Channel 15 – Blue Dimmer intensity section 5 0-255 Gradual adjustment Blue from 0 –...
Pixel Bar 12 MKII 36 DMX Channels Channel 1 – Red Pixel LED 1 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green Pixel LED 1 0-255 Gradual adjustment Green from 0 – 100% Channel 3 – Blue Pixel LED 1 0-255 Gradual adjustment Blue from 0 –...
04) The electric power supply cables must not show any damages or material fatigue. The Showtec Pixel Bar 12 MKII requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth.
Page 28
Pixel Bar 12 MKII Problem Probable cause(s) Solution No power to the fixture • Check if power is switched on and One or more cables are plugged in. fixtures do not function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.