Table of Contents
Advertisement
Studio Beam 575
Operating Determinations
●
This device is not designed for permanent operation. Regular operation breaks will ensure that the
device will serve you for a long time without defects.
●
The minimum distance between light-output and the illuminated surface must be bigger than 0,5
meter.
●
The maximum ambient temperature ta = 40°C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
●
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Studio Beam is lowered from the ceiling or high joists, professional trussing systems can be
used.
Use a clamp to mount the Studio Beam, with the mounting-bracket, to the trussing system.
The Studio Beam must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the Studio Beam, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Ordercode: 30657/30658
4
Advertisement
Table of Contents
