Related Manuals for SHOWTEC Cameleon Bar 12-3
Summary of Contents for SHOWTEC Cameleon Bar 12-3
- Page 1 Cameleon Bar 12-3 ORDERCODE 42694 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700...
- Page 2 For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
-
Page 3: Table Of Contents
Showtec Showtec Cameleon Bar 12-3 ™ Product Guide Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Overview ..................................7 Backside ..................................7 Set Up and Operation ............................... -
Page 4: Warning
Your shipment includes: • Showtec Cameleon Bar 12-3 with special 3-pin to IEC powercable 1,35m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time. - Page 5 Allow time to cool down, before replacing lamp. The user is responsible for correct positioning and operating of the Cameleon Bar 12-3 . The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
-
Page 6: Operating Determinations
If the Cameleon Bar 12-3 is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Cameleon Bar 12-3 , with the mounting-bracket, to the trussing system. The Cameleon Bar 12-3 must never be fixed swinging freely in the room. -
Page 7: Return Procedure
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture. -
Page 8: Description Of The Device
Description of the device Features The Showtec Cameleon Bar 12-3 is a light effect with high output and great effects. designed for indoor and outdoor use. • This fixture is extremely bright with perfect color mixing and wall wash effects •... -
Page 9: Overview
Overview Fig. 1 1) 12x 3-in-1 RGB LED Backside Fig. 2 Fig.3 7 8 9 2) Power In 6) LCD Display 3) DMX IN 7) Mode Button 4) DMX Out 8) Up Button 5) Power Out 9) Down Button... -
Page 10: Set Up And Operation
Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Remove all packing materials from the Cameleon Bar 12-3 . Check that all foam and plastic padding is removed. -
Page 11: Multiple Cameleon Bars (Dmx Control)
Multiple Cameleon Bars (DMX Control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. 2. Always use a safety cable (ordercode 70140 / 70141). Use a 3-p XLR cable to connect the Cameleon Bars and other devices. Link the units as shown in (figure 5), Connect a DMX signal cable from the first unit's DMX "out"... -
Page 12: Fixture Linking
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 13: Control Panel
Control Panel Fig. 6 A. MODE Button B. UP button C. DOWN button D. LCD Display DMX Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. DMX Addressing The control panel on the front side of the Cameleon Bar allows you to assign the DMX fixture address, which is the first channel from which the Cameleon Bar will respond to the controller. -
Page 14: Menu Overview
Menu Overview 1. Auto Program 2. DMX Address 3. Slave 4. Built-in Programs... -
Page 15: Main Menu Options
Main Menu Options Auto DMX address Slave Built-in Programs The Cameleon Spot will only show its version number at start-up ! 1. Auto Run Program 1) Press and hold down the MODE button on the device for 3 seconds at a time, until the display shows 2) With this menu you can set the Auto Mode of the Cameleon Bar. -
Page 16: Slave Mode
You can also press the MODE button to set a different DMX Mode 3) Use the Up button to change between both channel modes. 5 Channels 3 Channels 3. Slave Mode With this menu you can set the device to slave mode. 1) Press and hold down the MODE button on the device for 3 seconds at a time, until the display. -
Page 17: Dmx Channels
DMX Channels 5 Channels Channel 1 – Red 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green 0-255 Gradual adjustment Green from 0 – 100% Channel 3 – Blue 0-255 Gradual adjustment Blue from 0 – 100% Master Dimmer Channel 4 –... -
Page 18: Maintenance
Maintenance The Showtec Cameleon Bar requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a soft cloth. - Page 19 • Check that power is switched on One or more and cables are plugged in. fixtures are Internal fuse blown. • Contact your Showtec dealer. completely dead. Fixtures reset The controller is not connected. • Connect controller. correctly, but all 3-pin XLR Out of the controller •...
-
Page 20: Product Specification
Product Specification Model: Showtec Cameleon Bar 12-3 • This fixture is extremely bright with perfect color mixing and wall wash effects • Excellent device, when a small bar is needed with a bright output such as wall wash, truss projection &...