3M -MATIC 8000a-T Instructions Manual page 52

16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)
16.2 Spare Parts Order
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
Order parts by quoting the following information:
(Refer to the Identifi cation Plate on the Machine)
• MACHINE MODEL
• SERIAL NUMBER
• FIGURE NO.
• POSITION
• 3M PART NO. (11 DIGITS)
• DESCRIPTION
• QUANTITY
Refer to Manual 2 for recommended taping head spare parts.
Important!
The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically
updated. It is very important that all the orders of spare parts make reference to the serial number of the machine
(located on the identifi cation plate on the machine).
The manufacturer reserves the right to modify the machine at any time without notice.
Spare Parts – 8000a-8000a3 Adjustable Case Sealer
It is suggested that the following spare parts be ordered and kept on hand:
8000a-8000a3
Qty. 3M-Part Number
2 78-8076-5452-6
Spare Parts Kit
8000a - Part Number 78-8137-8730-2
8000a3 - Part Number 78-8137-8731-0
Label Kit
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety.
A label kit, part number 78-8137-7540-6 , is available as a stock item. It contains all the safety labels used on the
8000a-8000a3 Adjustable Case Sealer.
Tool Kit
A tool kit, part number 78-8137-7543-0 is supplied with the machine as a stock item. The kit contains the
necessary open end and hex socket wrenches for use with the metric fasteners on the case sealer. The threading
tool, part number 78-8076-4726-4 contained in above kit is also available as a replacement stock item.
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
8000a-8000a3 - NA
Description
Belt-Drive W/Hook
38
2014 June