Trimming Cam - Dürkopp Adler 52 i Series Service Instructions Manual

9.4 Trimming cam

Proper setting
If the trimmer is not active, then the shortest distance between the cam (1)
and roller (3) should be (A) = 0,2 mm.
Pic. 38: Trimming cam
(1) - Cam
(2) - Ring
1. Tilt the machine ( p. 12).
2. Locking the machine in place ( p. 17).
3. Loosen the 2 ring screws (2).
4. Loosen the 2 cam screws (1).
5. Shift the cam (1) to the roller (3) to the distance (A) = 0,2 mm from
6. Tighten the 2 ring screws (2).
7. Turn the cam (1) by slot (4) to the roller (3).
8. Tighten the 2 cam screws (1).
50
② ③
①
the straight face of the cam (1).
A
(3) - Roller
(4) - lot
Service Instructions 52Xi, 52Xi-75 - 00.0 - 11/2021
Thread trimming
④ ③
①