Selecting The Print Quality - Genicom 930 User Manual

Selecting the Print Quality

Important!
Front panel settings for print quality and character
pitch are overridden by software commands. The lights
will always reflect the printer's state.
PRINT QUALITY
Press to select:
PRINT QUALITY
NLQ: Near Letter Quality
• Highest quality, slowest speed
• Courier or Gothic fonts
• Recommended for correspondence
UTL: Utility
• Medium quality, medium speed
• Gothic font only
• Recommended for internal documents and
high-volume data
UTL
HSD
NLQ
SSD
HSD: High Speed Draft
• Lower quality, faster speed
• Gothic font only
• Recommended for drafts
SSD: Super Speed Draft
• Lowest quality (12 cpi only), fastest speed
• Gothic font only
• Recommended for fastest output of drafts
Using Super Speed Draft
To use Super Speed Draft (12 cpi only), enter the Menu
Mode and make changes as follows:
1. Press + .
SHIFT SEL
2. Press twice.
GROUP
3. Press until DRAFT prints as the setting for the
SET
Print Mode.
4. Press .
ITEM
5. Press (SSD prints).
SET
6. Press +
SHIFT SEL
changes.
to exit Menu Mode and save your
Using Your Printer E-25