4.7
Radio Relay
Start-up
Info
Switching on a Radio Relay or Inner Display triggers the recognition/machine learning of
a radio code.
1. Remove the the tub by pulling on the tab.
2. Place the jumper in the OFF position to avoid disturbing the outdoor temperature and UV
index values of Radio Relay K no. 1, Radio Relay [
3. Remove the insulating film from the batteries.
4. Reconnect the battery pack.
5. Raise the jar.
ð The red LED is flashing.
Ref. SB-CU-IMP-062EBLA / A - 11.05.2023
Installation and Operation Guide Version E-Box MAESTRO Lite - Installation
→
Page 22].
OFF
29 / 90