KROHNE OPTISWIRL 5080 Handbook page 81

OPTISWIRL 5080
Approvals and certificates
CE
Non-Ex
Hazardous areas Hazardous areas Hazardous areas Hazardous areas
ATEX
IECEx
FM (in preparation)
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
Vibration resistance
EMI and RFI
04/2020 - 4005615602 - MA OPTISWIRL 5080 R02 en
This device fulfils the statutory requirements of the relevant EU directives.
The manufacturer certifies successful testing of the product by applying the CE mark.
For full information of the EU directives & standards and the approved certifications,
please refer to the CE declaration or the manufacturer website.
Standard
Intrinsically safe: Intrinsically safe: Intrinsically safe: Intrinsically safe:
II 1G II 2D
Ex ia IIC T4 Ga
Ex tb IIIC T103°C Db
Compact and remote versions (electronics and junction box)
Flameproof: Flameproof: Flameproof: Flameproof:
II 2/1 (1) G II 2D
Ex db [ia Ga] ia IIC T4 Gb
Ex tb IIIC T85°C Db
Compact versions (electronics) and remote versions (electronics housing)
Intrinsically safe: Intrinsically safe: Intrinsically safe: Intrinsically safe:
Ex ia IIC T4 Ga
Ex tb IIIC T103°C Db
Flameproof: Flameproof: Flameproof: Flameproof:
Ex d [ia Ga] ia IIC T4 Gb
Ex tb IIIC T85°C Db
Compact versions (electronics) and remote versions (electronics housing)
Intrinsically safe for Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G; Intrinsically safe
Intrinsically safe Intrinsically safe
Also Zone approved AEx ia IIC
Explosionproof Explosionproof with IS sensor connection for Class I, Div. 1, Groups B, C, and D; Explosionproof Explosionproof
Dust-ignitionproof for Class II, Div. 1, Groups E, F, and G; Class III, Div. 1 Dust-ignitionproof
Dust-ignitionproof Dust-ignitionproof
Flowmeter was tested with up to 3g of acceleration with no physical damage, no shift in
calibration after the test and no loss of communications throughout the test.
Flowmeters meet the requirements of EN 61326-1.
www.krohne.com
TECHNICAL DATA
7
81