Multi Shot - Sharp MX-M350U Operation Manual

SPECIAL MODES
Select the tray 2.
9
OR COPY.
AUTO
ORIGIN
PLAIN
1. 8 x11 1 /
2
2. 8 x11 1 / TRANSPARENCY EXPOS
2
3. 11x17 PLAIN
PAPE
4. 8 x11 1 / PLAIN
2
COPY R
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
10 Touch the [TRANSPARENCY INSERTS]
key in the special modes screen (2nd
screen).
SPECIAL MODES
TRANSPARENCY
COVERS/INSERTS
INSERTS
BOOK COPY CARD SHOT

Multi shot

Multiple original pages can be copied onto one sheet of copy paper in a uniform layout. Select 2in1 to copy two
original pages onto one sheet, or 4in1 to copy four original pages onto one sheet. This function is convenient when
you wish to present multiple pages in a compact format, or show a view of all pages in a document.
[Example] Copying 4 original pages onto one sheet of paper
(Page number : 4in1, layout : left top : right top (see the next page))
One-sided copies from
one-sided originals
One-sided copies from
two-sided originals
5-24
AUT
100
The Transparency inserts
setting screen will appear.
The transparency inserts
icon ( , etc.) will also
appear in the upper left
corner of the screen to
indicate that the function
is turned on.
Copies
Set the insertion conditions for the insert
11
paper.
CANCEL
PRINT ON INSERT SHEETS
YES NO
(X)
(1) Select whether or not the insert paper will be
copied on with the (X) keys ([YES] or [NO]).
(2) The (Y) key shows the tray selected for the insert
paper and the paper size and type. To select a
different tray, touch this key to display the tray
selection screen and select the tray that has the
insert paper.
12 Touch the outer [OK] key in the screen of
step 7.
You will return to the main screen of copy mode.
About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document glass
is being used, see pages 4-11 through 4-13.
To cancel the Transparency film with insert sheets
function, touch the [CANCEL]
Transparency film with insert sheets setting screen.
● When using the multi shot function, place the
originals, select the desired paper size, and
select the copying mode before selecting the
multi shot function on the special modes screen.
● When using the multi shot function, the
appropriate copy ratio will be automatically set
based on the original size, paper size, and the
number of originals to be copied onto one sheet.
The minimum reduction ratio is 25%. The
original size, copy paper size, and selected
number of original pages may require that the
ratio be less than 25%. As copying will take
place at 25% in this case, part of the original
images may be cut off.
OK
OK
INSERTION SHEET
TRAY5
8 x11 1 /
2
PLAIN
(Y)
key on the