Sharp MX-M350U Operation Manual page 100

NORMAL COPYING
Select the desired output mode. (page 4-
4
9.)
2-SIDED COPY
OUTPUT
FILE
Use the numeric keys to set the desired
5
number of copies.
LOGOUT
cancel an entry if a mistake has been made.
4-12
Group mode is the
default mode.
To select sort mode,
touch the [OUTPUT]
key, touch the [SORT]
key in the screen that
appears, and then touch
the [OK] key.
Up to 999 can be set.
If you are only making a
single copy, the copy can
be made with the copy
number display showing
"0".
Use the [C] (clear) key to
Press the [START] key.
6
the output mode in step 4 and pressed the
[START] key, it is necessary to touch the [READ-
END] key.
7 Touch the [READ-END] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
To cancel copying...
To cancel a copy job in progress, press the [CA] key.
A confirmation message will appear. Touch the
[YES] key to cancel copying.
Replace the original with
the next original and
press the [START] key.
Repeat this operation
until all originals have
been scanned.
If you selected "Sort" for