Setting The Paper Size When A Special Size Is Loaded - Sharp MX-M350U Operation Manual

LOADING PAPER
Select the size of paper that was loaded in
7
the tray.
Touch the appropriate keys (checkboxes).
SYSTEM SETTINGS
TRAY 2 TYPE/SIZE SETTING
TYPE
AUTO-INCH
PLAIN
AUTO-AB
SIZE INPUT
[AUTO-INCH] key : Select when you have loaded
[AUTO-AB] key : Select
[SIZE INPUT] key : Select to directly enter a
[NON STANDARD : Select
SIZE] checkbox
[POST] key : Select this when you have
NOTE
Sizes that can be selected vary depending on the
selected paper type.

Setting the paper size when a special size is loaded

NOTE
Special sizes of paper cannot be loaded in trays 1, 3 and 4.
Tray 2 and the bypass tray
1 Perform steps 1 through 6 of "Setting the
paper type and paper size" (see page 2-5).
2 Touch the [SIZE INPUT] key and then
touch the [INCH] tab.
OK
Y
(5 1/2 17)
X
17
inch
(5 1/2 11 5/8)
Y 11
inch
INCH
AB
3 Touch the key or the
the X (width) and Y (length) dimensions of
the paper.
X
OK
Y
(5 1/2 17)
17
X
inch
(5 1/2 11 5/8)
Y 11
inch
AB INCH
2-6
TYPE OK
SIZE
11X17,8 X14,8 X11 1 / 1 /
2 2
8 X11R,7 X10 ,5 X8 R 1 / 1 / 1 / 1 / 1 /
2 4 2 2 2
A3,A4,A4R,A5R,B4,B5
B5R,216X330(8 X13) 1 /
2
NON STANDARD
X17 Y11
SIZE
2/2
an inch-based size of paper.
when you have
loaded an AB size of paper.
paper size (see below).
when you have
loaded a non-standard size
of paper (see below).
loaded postcards.
The size entry palette
appears.
key to enter
Entry of the X dimension
(width) is initially
selected. Touch the [Y]
key and enter the Y
dimension (length) in the
same way as the X
dimension.
Touch the [OK] key in the size setting
8
screen.
You will return to the tray setting screen of step 4.
Select output functions that can be used
9
with the selected tray.
DOC.
I-FAX
FAX
PRINT COPY
FILING
10 Configure paper settings for each tray and
then touch the [OK] key to exit.
NOTE
The type and size of paper loaded in the bypass tray
can also be set from the paper selection screen.
Touch the [PAPER SELECT] key at the top of the
base screen to display the paper selection screen,
touch the [PAPER SELECT] key for the bypass tray,
and then go to step 6.
4 Touch the [OK] key.
X
OK
Y
(5 1/2 17)
17
X
inch
(5 1/2 11 5/8)
Y 11
inch
AB INCH
5 If the paper is a non-standard size, select
the [NON STANDARD SIZE] checkbox.
11 17,8 1 / 2 14,8 1 / 2 11
X X X
8 1 / 2 11R,7 1 / 4 10 ,5 1 / 2 1 / 2 8 R 1 / 2
X X X
A3,A4,A4R,A5R,B4,B5
B5R,216x330(8 x13) 1 / 2
NON STANDARD
5 /
X17 Y11
8 SIZE
6 Perform steps 8 through 10 of "Setting the
paper type and paper size" (See above).
Touch the checkboxes
under the desired items
to select them.
Checkboxes that can be
selected will vary
depending on the options
that are installed.
You will return to the size
setting screen of step 2.