Sharp MX-M350U Operation Manual page 148

SPECIAL MODES
Storing text sequences
Follow steps 1 and 2 of "Common
1
operation procedure for using the print
menu" (page 5-31).
2 Touch the [TEXT] key.
OK
LAYOUT CANCEL OK
1/2
STAMP
DATE
PAGE
TEXT
NUMBERING
3 Touch the [STORE/DELETE] key.
PRE-SET
RECALL STORE/DELETE
4 Touch a key
programmed (a key in which No. xx
appears).
TEXT
STORE/DELETE
No.01 TARO YAMADA No.04
No.02 Meeting No.05
No.03
No.06
When touched, the character entry screen
appears. Enter the text (max. 50 characters). For
information on entering characters, see page 7-
29. When finished, touch the [OK] key to close the
character entry screen.
If no free keys appear, change screens with the
or key.
5 Touch the [BACK] key.
3 6 BACK
1/5
04 Minutes of meeting
05
06
5-40
that has not been
3 6 BACK
1/5
The entered text is
stored.
Editing and deleting stored text
Follow steps 1 and 2 of "Common
1
operation procedure for using the print
menu" (page 5-31).
2 Touch the [TEXT] key.
OK
LAYOUT CANCEL OK
1/2
STAMP
DATE
PAGE
TEXT
NUMBERING
3 Touch the [STORE/DELETE] key.
PRE-SET
RECALL STORE/DELETE
4 Touch the text key that you wish to edit or
delete.
TEXT
STORE/DELETE
No.04 Minutes of meeting
No.01 TARO YAMADA
No.02 Meeting No.05
No.03 No.06
5 To edit the text, touch the [AMEND] key. To
delete the text, touch the [DELETE] key.
A TEXT HAS BEEN ALREADY STORED TO
LOCATION.CHANGE THE TEXT?
CANCEL DELETE AMEND
No.06
29. When finished, touch the [OK] key to close the
character entry screen.
If you touch the [DELETE] key, the text will be deleted
and you will return to the screen of step 4.
To cancel editing or deletion, touch the [CANCEL] key.
6 Touch the [BACK] key.
3 6 BACK
1/5
04 Minutes of meeting
05
06
3 6 BACK
1/5
When the [AMEND] key is
touched, the character
entry screen appears.
The selected text
sequence is entered. For
information on entering
characters, see page 7-