Saddle Stitch Finisher Functions - Sharp MX-M350U Operation Manual

Stapling capacity
Staples
Power supply
Dimensions
Weight
Name
Paper sizes for hole
punching
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.

Saddle stitch finisher functions

■ Sort mode
Sorted sets will be delivered.
Original
■ Offset mode
Offset mode
8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m
8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m
*Up to two sheets of 34 lbs. or 128 g/m
Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centered on the left side.
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Supplied from machine
29-41/64"* (W) x 23-3/4" (D) x 37-33/64" (H) (753 mm* (W) x 603 mm (D) x 953 mm (H))
*When the top tray is extended.
Approx. 86 lbs. (39 kg)
Punch module
3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Printouts
Non-offset mode
SADDLE STITCH FINISHER
paper can be included as covers.
2
■ Group mode
Groups of copies of the same page will be
delivered.
Original
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.
)
2
)
2
Printouts
3-15
3