Xy Zoom - Sharp MX-M350U Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

XY ZOOM

The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can be set
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
Original
Place the original in the document feeder
1
tray or on the document glass. (pages 4-3
to 4-6)
NOTE
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
2 Touch the [COPY RATIO] key.
AUTO A4
PAPER SELECT
100%
COPY RATIO
3 Touch the [XY ZOOM] key.
MENU

XY ZOOM

4 Touch the [X] key.
100
X
Y
100
ZOOM
4-18
Copy
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not
necessary. Touch the [X]
key only if it is not
highlighted yet.
Use the reduction, enlargement, and
5
ZOOM ([ ], [
copy ratio in the horizontal (X) direction.
Y 10
64%
ZOOM
50%
XY ZOOM
50
X
Y
100
ZOOM
to touch the [ ]/[
automatically. After 3 seconds, the ratio will
change rapidly.)
NOTES
● Touch a reduction or enlargement key to set the
approximate ratio, then touch the [
increase the ratio or the [
ratio.
● Automatic changing of the ratio when a zoom key
is continuously touched can be disabled in the
administrator settings (see "Key operation setting
(prohibit key repeat)" on page 10 of the
administrator settings guide).
6 Touch the [Y] key.
50
X
Y 100
ZOOM
]) keys to change the
A fixed ratio key will not
become highlighted
when touched.
Zoom ratios: Any ratio
from 25% to 400% can
be set in 1% increments.
Touch the [ ] key to
increase the ratio, or the
[ ] key to decrease
the ratio. (If you continue
] key, the ratio will change
] key to
] key to decrease the