quadient IS-330 Quick Installation Manual
Hide thumbs
Also See for IS-330:
- Self-installation manual (14 pages) ,
- Installation manual (10 pages) ,
- User manual (184 pages)
Advertisement
Quick Links
CAUTION:
use a solid and steady table, far
from any door or fan.
2
INSTALL THE HAND FEED TABLE AT THE LEFT OF THE BASE:
fit the slots of the Base over the tabs of the table.
6
INSTALL THE PSD
in the slot and then close the cover.
1
Check the box contents.
A
3
CONNECT THE LAN
to a network RJ45 plug of the Base and
to the LAN wall socket using the LAN cable
.
B
7
C
CONNECT THE SYSTEM POWERPLUG.
Follow the installation wizard on the screen. Refer to the installation section in the User Guide.
IS-330/350 QUICK INSTALLATION GUIDE
B
4
OPEN THE BASE COVER,
remove the headset protecting
strips and insert the headset in its compartment, then push
the headset back until it clicks.
C
5
WRITE DOWN THE PSD
number, you may need the number
later.
For more information about your mailing
system, please visit :
kb.quadient.us
Advertisement
Related Manuals for quadient IS-330
Summary of Contents for quadient IS-330
- Page 1 IS-330/350 QUICK INSTALLATION GUIDE Check the box contents. CAUTION: use a solid and steady table, far from any door or fan. OPEN THE BASE COVER, remove the headset protecting CONNECT THE LAN WRITE DOWN THE PSD INSTALL THE HAND FEED TABLE AT THE LEFT OF THE BASE:...
- Page 2 IS-330/350 For more specific information about your mailing system, see the User Guide. kb.quadient.us/is350_ug Applying postage Getting to know your mailing system Screen main zones To weigh your mail... Put your mail on the scale When the weight is displayed...
Need help?
Do you have a question about the IS-330 and is the answer not in the manual?
Questions and answers