3.4
In [Received] Mode Section
This section describes how to use the [Received] type of imprint, to:
3
• Print the date on incoming mail, and/or
• Print 'Received' on incoming mail
See also
• About the use of the Type of imprint, see
Setting [Received] Mode printing
The procedure below outlines steps required to imprint incoming mail.
You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.
How to Set [Received] Mode printing
Required settings:
1.
Make sure you are on the home screen of the [Received] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated.
44
Printing Incoming Mail with [Received] Mode
Make sure you have completed the preparation steps mentioned
in
Preparing and Starting your Work Session
Choosing a Type of Imprint
on page 29.
on page 31.