quadient IS-350 User Manual page 48

3. To print the imprint, insert the mail piece into the base against the rear-guide wall,
with the side to be printed facing upwards.
4. The Mailing System applies postage and the mail piece is sent to the catch tray.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press
If you want to seal the envelope, first engage the flap into the
moistener.
Do not try to moisten self-adhesive envelopes.
If a mail piece is bigger than mail path maximum thickness, you
may use a label tape. To know the maximum thickness, see
Specifications on page 199.
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
.
3
Mail
43