2.
Specify the length of each timeout using the keypad and press [OK] to display the
next screen, until the Summary screen is displayed.
3.
Press [OK] to exit.
Setting Default TimeOuts
How to Change System TimeOuts
To change the system timeouts:
1.
As supervisor (see
Press
The Timeout setting screen is displayed.
2.
Specify the length of each timeout using the keypad and press [OK] to display the
next screen, until the Summary screen is displayed.
Use the [C] key to clear old settings then enter a new value.
This is a user setting that only lasts as long as you are logged
in.
How to Log in as Supervisor
and select the path:
Use the [C] key to clear old settings then enter a new value.
on page 130):
Default user settings
Timeout settings
139
8