10.3
Cleaning the mail path includes:
• Cleaning moistener brushes and sponge (if installed).
• Cleaning the Mailing System sensors on the mail path.
Cleaning Brushes and Sponge of the Moistener
Cleaning the Brushes and Sponge (Moistener)
To clean the brushes and sponge of the feed table moistener:
1.
Remove the moistener assembly from the table.
10
2.
Raise the brush.
3.
Lift the metal sponge retainer to remove the sponge.
4.
Clean the sponge and the brush.
184
Cleaning the Mail Path
MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM POWER
SOURCE BEFORE CLEANING!