Running [Pass Through] Mail; How To Set [Pass Through] Mail Processing - quadient IS-350 User Manual

3.5

Running [Pass through] Mail

In Running [Pass through] Section
This section describes how to use the [Pass through] type of imprint, for:
• Only conveying mail, for counting or testing purposes.
• Conveying mail for sealing mail without printing.
See also
• About the use of the Type of Imprint, see
Setting [Pass through] Mail processing
The procedure below outlines steps required to process mail.
You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.

How to Set [Pass through] Mail processing

Main setting:
1. Make sure you are on the home screen of the [Pass through] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session
Choosing a Type of Imprint on page 29.
on page 31.
47
3