Table of Contents
Advertisement
Temperature range of the ambient air:
-
-
Relative humidity:
-
-
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6500 ft.)
Obligations of
The operating company must only allow persons to work with the device if they
the Operating
-
Company
-
-
The safety-conscious work of the personnel must be checked regularly.
Obligations of
All persons who are assigned to work with the device must do the following be-
Personnel
fore beginning the work:
-
-
Before leaving the workplace, ensure that no personal injury or property damage
can occur in one's absence.
Particular Haz-
Do not linger in the operating area of the robot.
ard Areas
Always integrate the device into a higher-level safety system in a secured area.
If this area has to be accessed for preparatory or maintenance work, ensure that
-
-
If untrained operating personnel have access to the device, the compressed air
supply to the device must be disconnected for the duration of this access in ac-
cordance with "Performance Level d" of ISO 13849-1.
In addition to these Operating Instructions, the safety rules of the robot manu-
facturer must be followed.
The human body, and, in particular, hands, face and hair, plus items of clothing
and all tools, must be kept away from moving components, such as:
-
-
-
-
Do not touch the cleaning cutter immediately after operation - burning hazard.
Follow the special safety regulations for handling the cleaning cutter in the Op-
erating Instructions.
6
During operation: 0°C to + 40°C (32°F to 104°F)
During transport and storage: -25°C to +55°C (-13°F to 131°F)
Up to 50% at 40°C (104°F)
Up to 90% at 20°C (68°F)
Are familiar with the basic occupational safety and accident prevention regu-
lations and are trained in handling the device
Have read and understood these Operating Instructions, especially the sec-
tion "Safety Rules," and have confirmed this with their signature
Are trained according to the requirements for the work results
Follow the basic regulations for occupational safety and accident prevention
Read these Operating Instructions, especially the section "Safety Rules," and
confirm that they have understood and will follow them by signing
the entire system is shut down for the duration of access to this area
and remains shut down to prevent unintended operation, e.g., as a result of a
control error.
the rotating cleaning cutter
the cleaning motor that moves up and down
the gas nozzle clamping device that moves in and out
Wire cutter
Advertisement
Table of Contents
Troubleshooting
