Personal Protection And Protection Of Others; Emc Device Classifications; Emc Measures - Fronius Robacta Reamer V Comfort Operating Instructions Manual

Protect hands, face and eyes from flying parts (chips, etc.) and compressed air/
parting agent mixture discharged from the parting-agent injection nozzle.
Covers must only be opened/removed during maintenance, installation and re-
pair work.
During operation:
-
-
Personal Protec-
You are exposed to numerous hazards while handling the device. In addition to
tion and Protec- these Operating Instructions, the safety rules of the manufacturer of the entire
tion of Others welding system must be followed.
Keep persons, especially children, away during the operation of the devices and
during the welding process. However, if persons are in the vicinity:
-
-
-
EMC Device
Devices in emission class A:
Classifications -
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.

EMC Measures

In certain cases, even though a device complies with the standard limit values for
emissions, it may affect the application area for which it was designed (e.g., when
there is sensitive equipment at the same location, or if the site where the device
is installed is close to either radio or television receivers).
If this is the case, then the operating company is obliged to take appropriate ac-
tion to rectify the situation.
Check and evaluate possible problems and the interference immunity of equip-
ment in the vicinity according to national and international regulations:
-
-
-
-
ensure that all covers are closed, and all side parts have been mounted prop-
erly
keep all covers closed
instruct them about all hazards (crush hazard posed by moving mechanical
parts, injury hazard from the cleaning cutter, flying chips or similar, dis-
charged compressed air/parting agent mixture, injury hazard due to flying
sparks, blinding hazard due to arcs, welding fume hazardous to health, noise
exposure, possible hazard due to mains current or welding current, etc.)
Provide suitable protective equipment, or
construct suitable protective walls and curtains.
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage grid.
Safety devices
Grid power lines, signal lines, and data transfer lines
EMC and telecommunications equipment
Devices for measuring and calibrating
7