Callback - Idis DR-2516P Operation Manual

Callback

Configure Callback settings.
Enter the title and IP address of the receiving server and
set Retry to between 1 and 10 in case of connection
failure.
Select the Setup... button at the lower right corner of the
screen to configure Callback Retry Policy.
● Short-Term Retry Policy: Configure short-term policy
to retry a callback event.
– Retry: Number of times to retry a callback event.
– Dwell: Wait time (in seconds) between retry
attempts
● Long-Term Retry Policy
– Use: Configure long-term policy to retry a callback
event.
– Retry: Number of times to retry a callback event.
– Dwell: Wait time (in minutes) between retry
attempts
– Check Interval: Interval time (in minutes) to check
failover.
In a general wired network communication
environment, not a wireless (mobile) /
satellite communication environment where
communications failures are frequent, long-term
retry policies (LTRPs) are not required, except for
particular cases.
Part 2 - Configuration
107