Idis DR-2516P Operation Manual page 22

Part 1 - Getting Started
Find Password
If you do not know the password, select FIND PW . You
can set a new password.
1
Enter a user, registered email and then select Get
Verification Code.
2
Enter Verification Code and select OK.
• Select the question mark button at the bottom
left corner of the screen to refer to the password
settings instructions.
• The password must be entered only with the
virtual keyboard.
• FEN service must be enabled to use find
password function. For more information on
e-mail, refer to Mail on page 108.
22
3
Enter an UPR(User Password Reset) verification and
then click on UPR Verification button.
4
Select the UPR file and then click on Import button.
• To use UPR function, the UPR file must be saved
in advance. For more information on saving the
UPR file, refer to User on page 37 .
• You can reset the password using an encrypted
UPR (User Password Reset; filename extension *
.upr) file.
• It can be used as USB flash driver on local pc,
but not remotely.
• Only files exported from the same device are
available.
• If you lose the UPR file and change the password
of the NVR, the UPR file may not be used.
5
To set a new password, click the question mark
button in the lower left corner and follow the
instructions.