Idis DR-2516P Operation Manual page 53

Day & Night Options
● Black & White Mode: Display the images in grayscale
for greater clarity in low-lighting conditions.
– On/Off: Enable/disable Black & White Mode.
– Auto: Allow the system to enable/disable Black &
White Mode automatically.
– Schedule: Set up the Black & White Mode
schedule. Black & White Mode is disabled for all
days and times that are designated as Daytime in
the schedule and is enabled at all other times.
● IR Mode: IR Mode blocks out the infrared spectrum.
You can ensure clear images at all times by blocking
out the infrared spectrum in high-lighting conditions
and allowing the infrared spectrum to pass through in
low-lighting conditions.
– Daytime Mode/Nighttime Mode: Enable/disable
IR Mode.
– Auto: Allow the system to enable/disable IR Mode
automatically.
– Schedule: Set up the IR Mode schedule. IR
Mode is disabled for all days and times that are
designated as Daytime in the schedule and is
enabled at all other times.
Some camera models may not support the
Schedule function.
● Switching Mode : Changes the switching mode of
daytime and nighttime. In normal mode, daytime/
nighttime is switched through the amount of light
received by the ambient light sensor. In advanced
mode, it is switched through the amount of light and
the analysis of the camera video.
● Switching Level : Controls the changing time
of daytime / nighttime mode, depending on the
Switching Level. The higher the value is, day /
nighttime mode is changed under high-lighting
conditions. Also the lower the value is, day / nighttime
mode is changed under low-lighting conditions.
View Options
● Type: Selects the camera view.
● Mode: Selects the screen layout in live mode.
• Dewarping feature is not supported when mode is
set to the original.
• When changing the view mode, the resolution will
be applied automatically.
Miscellaneous
● Image Stabilizer: Activate Image Stabilizer. The
Image Stabilizer reduces blurring caused by camera
shake that results from external conditions such as
the wind.
● Video Out Mirror: If the video output is CVBS, the
screen can be inverted.
● Heater Mode: Set whether to use the heater. If On,
the heater will operate if the camera's temperature is
lower than the heater operating temperature. If Off,
the heater will not operate regardless of temperature.
Part 2 - Configuration
53