Sd Card; Maintenance - Idis DR-2516P Operation Manual

SD Card

If connection between the camera and NVR fails, the
video will be recorded on SD memory card of the
camera. When the connection is recovered again, the
recorded video on SD memory card will be recorded on
the NVR. For more information on Smart Failover, refer
to the Smart Failover on page 62.
● Recycle : When there is not enough storage available
on SD memory card, the oldest video will be deleted
automatically.
● Format : Click on this button to format the inserted
SD card. Formatting the SD card deletes all data saved
on the card.
● Status : Display the status of the SD card.
• This function is only supported for the cameras
supporting Failover recording of SD memory
card.
• For cameras is in use by other NVRs or the newly
registered cameras, the Format option displays
Other. Please format the SD card to use this
function.

Maintenance

When using NetFS, select Firmware Upgrade. You can
select USB port or NetFS. If not, you can only select USB
port.
Select USB port to display USB search window and then
select the corresponding upgrade package from the
storage device connected to the NVR's USB port. After
selecting an upgrade package, select Apply to upgrade
the camera. Camera settings can be imported or
exported.
• If an upgrade attempt fails, an upgrade failure
message will be displayed. Refer to Error Code
Types in the installation manual for more details.
• The camera will reboot after the upgrade and then
reconnect automatically.
Part 2 - Configuration
57