Idis DR-2516P Operation Manual page 48

Part 2 - Configuration
– Directional Buttons (
Used to tilt and pan the camera.
– Zoom (
): Zoom in and out.
– Focus ( ): Adjust camera focus to far or near.
– Speed: Specify the camera's panning and tilting
speed.
● Set: Choose a preset number and then enter a name.
This saves the current preset under the specified
preset number and name.
● Go to: Select a preset from the list and then click Go
to to move the camera to the selected preset position.
● Edit: Used to change the selected preset's name.
● Remove: Used to remove the selected preset.
2 Scan
Used to set up a profile for moving the camera between
two points. At least two presets must be available in
order to use the scan feature.
Set: Used to set up a scan profile.
– Name: Enter a name for the scan profile.
– Start/Stop: Specify which presets to use as start
and stop points.
– Dwell Time (sec.): Specify how long the camera will
dwell at start and stop positions.
– Speed/Direction: Specify scanning speed and
direction.
● Test: Select a scan profile and then click Test to test it.
● Edit: Used to edit the selected scan profile.
● Remove: Used to remove the selected scan profile.
3 Pattern
Used to set up a pattern profile for the camera to follow
along.
48
):
Start recording: Select a pattern number, enter a name
for the pattern, and then click OK to save the pattern.
Move the camera using directional, zoom, and focus
buttons and then click Stop recording to save the
pattern profile. You can record up to two minutes of
movement.
– Directional Buttons (
Used to tilt and pan the camera.
– Zoom (
– Focus (
– Speed: Specify the camera's panning and tilting
speed.
● Test: Select a pattern profile and then click Test to test
it.
● Edit: Used to edit the selected pattern profile.
● Remove: Used to remove the selected pattern profile.
4 Tour
Used to set up a tour profile of multiple functions in a
designated sequence.
Set: Used to set up a tour profile.
– Name: Enter a name for the tour profile.
– Function: Indicates the order of the function in the
): Zoom in and out.
): Adjust camera focus to far or near.
):