Camera Registration; Camera Scan Button - Idis DR-2516P Operation Manual

Part 1 - Getting Started

Camera Registration

Once Network Setup Wizard is complete, live mode
screen appears. While in live mode, right-click on the
mouse and select Camera Registration to run the
Camera Registration mode. It allows you to scan for the
cameras connected to the NVR.
1
3

Camera Scan Button

1
Camera View Menus
2
Camera List Area
3
Video Display Area
4
Apply/Cancel Buttons
5
You can also register cameras on the remote
program. For more information on the remote camera
registration, refer to Registration on page 13.
14
2
4
5
Camera Scan Button
You can scan and search and register cameras that were
not detected automatically or third party cameras.
Pressing the Scan button displays the following sub-
menu.
Rescan
Scans for DirectIP cameras that were not scanned
automatically.
Third Party Scan
Used to manually scan for third-party cameras that
cannot be recognized by the auto scan feature.
• Some functions may not be supported for the
third-party cameras depending on their protocol
and model.
• The device to be registered must have different IP
addresses. Otherwise, the connection may fail.
● Protocol: Select the protocol used by the camera (or
video encoder) you wish to search for.