Callback
Configure Callback settings.
Enter the IP address of the receiving server and set
Retry to between 1 and 10 in case of connection failure.
Select the Setup... button at the lower right corner of the
screen to configure Callback Retry Policy.
● Retry Policy: Configure a policy to retry a callback
event.
– Retry: Number of times to retry a callback event.
– Dwell: Wait time (in seconds) between retry
attempts
● Max. Queue Size : Determine the maximum number
that can be processing events. You can limit from 300
to 1000 queues. For more information on Callback
Retry Policy, refer to the graph below.
Part 2 - Configuration
67