Idis DR-2516P Operation Manual page 120

Part 3 - Search
Search Menu
1 2
1 Layout
Used to change the screen layout to single screen,
corridor format, 2x2,1p5, 1p7, 3x3, 1p12 or 4x4.
2 Previous/Next Group
Loads the previous/next screen group.
3 Display
● Full Screen On: Display the screen with a 16:
9 aspect ratio. When you place the mouse at
the bottom of the screen, the interface screen
releated to playback will appear. Refer to detailed
explanations on the next page.
● Full Screen OFF: Display Time-Lapse Seacrh
screen.
● Camera OSD On/Off: Enables/disables the camera
OSD feature.
● Status OSD On/Off: Enables/disables the status
OSD feature.
● Aspect Ratio On/Off: Setting On displays video on
the camera screen in its original ratio.
4 Alarm
Pressing this button while the alarm has been
activated resets all NVR alarm outputs, including the
built-in buzzer.
5 Database
120
3 4 5 6 7 8 9
● Record: Search recording data contained in the
main recording device.
● Record Protection: Protect the recording data
even if overwriting is enabled.
● Other: Search data recorded while disks used in
other systems were connected.
6 Panic Record
Use the Panic Record feature.
7 Camera
Select a camera channel and display it as a single
screen.
8 Live Mode
Activates Live mode.
9 Search Mode
Search by changing Time-Lapse Search and Event Log Search.