Idis DR-2516P Operation Manual page 109

● +Mail: Add a mail recipient
Select the group name and then assign the Group to
Recipient. Enter the recipient's e-mail address and mail
server provider. Select the
server provider from a list of registered SMTP mail server
providers.
The recipient's mail address must be in the correct
email format and contain the @ symbol.
Select the Attach Type to attach event recordings
to outgoing mails to an account that belongs to that
group.
Select the icon to remove the account and added
group.
SMTP Setup
Select SMTP Setup at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server Type.
2
Enter the SMTP Server's IP address or domain name
and then configure the Port and Sender settings.
Default SMTP server port number is 25. Select Test to
send out a test mail using the current settings.
Select SS/TLS or STARTTLS, depending a method of
supporting a secure connection.
• If you have configured the DNS Server setting under
Network - WAN, you can enter the STMP server's
domain name instead of its IP address in the SMTP
Server field.
• Address entered under Sender must be in the
correct email format and include the @ symbol.
icon to select the mail
If user authentication is required by the SMTP server,
select Use and then enter the User and Password
information.
3
Select OK to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).
Attach Type Setup
● Encoding (File name): Set the encoding for the name
of the attached files to BASE64 or PLAIN-TEXT.
● Priority: Set the stream video for email and FTP
attached files to Main Stream or Sub Stream.
● MP4 Clip: When sending an e-mail, event recordings
will be attached and you can set the time to record
MP4 clips.
Event recordings are attached only for the event
that the camera generates.
Part 2 - Configuration
109