Table of Contents
Advertisement
15
General Information
HOW TO IDENTIFY CHARGE ALGORITHM NUMBER
The algorithm numbers offered can be found in See Battery Charger Algorithms on page 15-2. The charger can
display its algorithm number by initiating Algorithm Display Mode. To enter Algorithm Display Mode, do the following:
1.
Disconnect the AC cord from the power outlet.
2.
Disconnect the DC connector from the battery charger.
3.
Wait for 1 to 1.5 minutes.
4.
Connect the AC cord into the power outlet.
4.1.
All of the charger lights will turn on and then off.
4.2.
The AC on symbol will turn on.
4.3.
The current algorithm will display for 11 seconds.
2388B
Figure 15-1 80% Charge Light
5.
If the 80% charge light flashes, the current algorithm is 72 (Figure 15-1).
NOTE: The 80% charge light will flash 7 times, pause, then flash 2times.
2387B
Figure 15-2 Number 3 Light
6.
If the number 3 light flashes, the current algorithm is 3 (Figure 15-2).
7.
Disconnect the AC cord from the power outlet.
8.
Connect the DC connector.
Battery Charger Algorithms
CHARGER MODEL (PART NUMBER)
912–4854–04
912–4854–04
Page 15-2
2015 Carryall 500 and 700 Maintenance and Service Manual
ALGORITHM
algorithm # 72
algorithm # 3
QUIQ HIGH FREQUENCY CHARGER
BATTERY TYPE
JCI
Trojan
Advertisement
Table of Contents
Troubleshooting
