Cleaning And Maintenance - Fieldmann FZP 70105-0 Manual

2. Make second cut on underside of log. Directly under first cut. Use top of guide bar to make this cut. Cut up to
meet first cut. This will keep log from pinching guide bar and chain.

7. CLEANING AND MAINTENANCE

Cleaning saw body
Warning! Unplug chain saw from power source before servicing, sever injury or death could occur from
electrical shock or body contact with moving chain.
Warning! Cutting edges o chain are sharp, use protective gloves when handling chain.
Warning! Cleaning saw body.
Do not submerge saw in any liquids.
Do not use products that contain ammonia, chlorine, or abrasives.
Do not use chlorinated cleaning solvents, carbon tetrachloride, kerosene, or gasoline.
Keep saw body clean, use a soft cloth dampened with a mild soap ad water mixture, wipe saw body to clean.
Care of guide bar (fig.16)
Uneven bar wear causes most guide bar problems, incorrect sharpening of chain cutter and depth gauge
settings often cause this, when bar wears unevenly, it widens guide bar groove, this causes chain clatter ad river
popping. Saw will not cut straight, replaces guide bar if this occurs.
Inspect guide bar before sharpening chain. A worn or damaged guide bar is unsafe. A worn or damaged guide
bar will damage chain, it will also make cutting harder.
CORDLESS MINI CHAINSAW
1st Cut
2nd Cut
Fig. 1 5
Cleaning and maintenance
USER'S MANUAL
19 EN