Contents Electrical Circular Saw INSTRUCTION MANUAL Thank you for your purchase of the electrical circular saw. For your personal safety, read and understand the Instruction Manual before using. Keep the Instruction Manual in a safe place for future reference. CONTENTS PICTORIAL APPENDIX ........................
Adherence to the attached instructions for use is a precondition for the proper use of the machine. The operation manual includes also instructions for operation, maintenance and repairs. The manufacturer does not take any responsibility for accidents or damages resulting from the failure to adhere to this manual. FDK 2001-E...
Ensure that any retraction mechanism of the guard system operates correctly. Remove plug from the main supply before replacement of the blade, making adjustments, or other maintenance work. Using manufacturer data to check the suitability of the cutting blade: FDK 2001-E...
Safety instructions | Application | Adjustment and operation - ensure that the diameter, thickness and other characteristics of the blade are suitable for the tool; - ensure that the blade is suitable for the spindle speed of the tool. Do not use blades the body of which is thicker or the set of which is smaller than the thickness of the riving knife.
7. MAINTENANCE Keep the ventilation slits in the motor housing unblocked and clean. If you find your saw blade is damaged or excessively worn, replace it with a new one immediately. FDK 2001-E...
Operation and maintenance hints 8. OPERATION AND MAINTENANCE HINTS Store the machine, Instruction Manual and the accessories in the original packaging. In this way you will always have all the information and parts ready to hand. Devices are to a large extent free of maintenance, you only need a damp cloth to clean the casing.
Declaration of conformity 9. DECLARATION OF CONFORMITY Product/Name: CIRCULAR SAW / FIELDMANN Type/Model: FDK2001E ............ 230V /50Hz / 710W / 4600min / 140mm The product complies with the following directives: The Directive of the European Parliament and the Council No. 2006/95/EC dated 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits.
Technical specifications 10. TECHNICAL SPECIFICATIONS Power supply ............................. 230V~ / 50Hz Power input ................................710W Speed ................................4600 rpm Cutting blade ........................Ø 140 x 1.4 x Ø 16 mm Maximum cutting depth ..........................40 mm Power supply cable length ..........................1,8 m Weight .................................
This product fulfils all basic requirements of the EU directives that apply to it. Text, design and technical specifications can change without prior notice and we reserve the right for their change. FDK 2001-E...