Fieldmann FZP 70105-0 Manual page 9

Remove any adjusting tools or wrenches before turning the power tool on. An adjusting tool or wrench left
attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts,. If devices are provided for
the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use
of these devices can reduce dust-related hazards.
Power tool use and maintenance
Do not force the power tool. Use only the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Unplug the power cord from the mains outlet before making any adjustments, changing accessories,
or storing power tools. Such preventative safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, pay particular attention to cracks,
breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner
intended for the particular type of power tool, taking into account the given working conditions and the work
to be performed. Use of the power tool for operations other than those for which the power tool is intended
could result in hazardous situations.
Service
Have your power tool serviced by a qualified repair person using only original replacement parts. This will
ensure that the safety of the power tool is maintained.
Storage
only carry and store the tool with the scabbard fitted
carefully clean the tool and carry out adequate maintenance before storing
before carrying, secure the tool against fuel leakage, damage or injury
Use and treatment of the cordless tool
Only charge the batteries with chargers recommended by the manufacturer.A charger that is suitable for
a certain type of battery creates a fire hazard when used with other batteries.
Only use the batteries provided for this purpose in the power tools.The use of other batteries can lead to
injuries and fire hazards.
Keep the unused battery away from paper clips, coins, keys, nails, screws or other small metal objects that
could cause the contacts to be bridged.A short circuit between the battery contacts can result in burns or fire.
If used incorrectly, liquid can leak out of the battery.Avoid contact with it.In case of accidental contact, rinse
with water.If the liquid gets into your eyes, get additional medical help.Leaking battery fluid can cause skin
irritation or burns.
CORDLESS MINI CHAINSAW
9
Safety instructions
USER'S MANUAL
EN