Fieldmann FZP 70105-0 Manual page 11

3. Place the chain (1) in the grove of the bar (2), pay attention to the correct running direction, as shown by the
running direction symbol (fig.3)
4. Place the chain links around the sprocket (12) and put the bar on such that the one locating pegs fit into the
slotted hole of the bar. (fig.4) )
5. Fitting the cover (4) and tighten knob(3) on sprocket cover . (fig.5) )
Setting the chain saw tension (fig.6)
WARNING!
The saw chain has very sharp edges. Use protective gloves for safety. To adjust the chain tension as follows:
CORDLESS MINI CHAINSAW
Fig.3
Fig.4
( ) (
Fig.5
Functional description
)
11 EN
USER'S MANUAL