Connecting Several Projectors - NEC PA1705UL-W Installation Manual

7-4. Connecting several projectors

It enables to project HDMI, DisplayPort, HDBaseT image on several projectors connecting the HD-
BaseT IN port and the HDBaseT OUT port by LAN cable. The projectors support same brightness
can be connected up to four units.
HDBaseT IN
NOTE:
• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connected before inputting
video signals into this device. The HDBaseT OUT port of the projector is equipped with repeater function. When a device is connected
to the HDBaseT OUT port, the resolution of the output signal is limited by the resolution supported by the connected device.
• Connecting and disconnecting an LAN cable or selecting another input source on the second and subsequent projectors will disable
the HDBaseT repeater function.
• This projector is not guaranteed to work correctly in the connection with an other device as a monitor.
HDBaseT OUT
a
b
a: Master projector / b: Other projector
7. Connecting to Other Equipment
157