Controlling The Projector By Using An Http Browser - NEC PA1705UL-W Installation Manual

3-8. Controlling the Projector by Using an HTTP Browser

Overview
You can display the HTTP server screen of the projector by using a web browser and operating the
projector with a computer or smartphone.
Possible operations on the HTTP server screen
• Operate the projector.
Operations such power on/off of the projector, input terminal switchover, and lens control etc.
can be carried out.
• Adjusting the picture and projection screen, such as picture adjustment, geometric correction,
edge blending, etc. is possible.
• Network settings (smartphones are not supported)
Configure the various settings when using the projector connected to a network (wired LAN).
Also, it is possible to configure the connection settings with various control systems.
For details about settings and adjustments, see the explanation on the screen menu.
Important:
• The default [WIRED LAN] setting of this projector is set to [DISABLE] when it is shipped from the factory. To connect to a network,
display the on-screen menu and change the [WIRED LAN] profile setting in the [NETWORK SETTINGS] from [DISABLE] to [PROFILE
1] or [PROFILE 2] to enable the [WIRED LAN].
• When setting up a [WIRED LAN] for the first time after purchasing the unit, be sure to set the [NETWORK PASSWORD].
To view the HTTP server screen
For computers
1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 168)
2. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN] in the on-screen menu to configure
the network settings. (→ page 143)
3. Start up the web browser on your computer and enter the address or URL in the input
field.
Specify the address or URL as "http://<IP Address of Projector>/index.html".
The HTTP server screen will be displayed.
For smartphones
1. Connect a wireless LAN compatible router to the projector with a commercially available
LAN cable.
2. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN] in the on-screen menu to configure
the network settings. (→ page 143)
3. Configure the network settings of the smartphone so that it can be connected to the
projector.
51
3. Convenient Features