NEC PA1705UL-W Installation Manual page 170

[ACCOUNT]
You can register three types of accounts: [USER1], [USER2], and [USER3].
When [PASSCODE] is set, [REGISTER] is enabled for each user.
[CHANGE USER NAME], [CHANGE PASSWORD], [ENABLE], and [DELETE] can be selected once the
account has been registered at [REGISTER].
REGISTER
CHANGE USER NAME
CHANGE PASSWORD
ENABLE
DELETE
[PASSCODE]
Set the passcode for the network administrator.
When the passcode is set, a confirmation screen is displayed when opening the [NETWORK SERVICE]
screen of the on-screen menu and the [SERVICES] tab of the HTTP server, and the passcode must be
input.
Set the passcode using a combination of the ▼▲◀▶ buttons on the main unit or the remote control.
To delete the passcode, register with the [PASSCODE] entry field blank.
NOTE:
• Make a note of your passcode and store it in a safe place.
• If you forget your passcode, contact your distributor.
Set the user name and password of the account for use with [HTTP
SERVER] authentication and [AUTH. PC CONTROL].
Change the user name registered at [ACCOUNT].
Change the password registered at [ACCOUNT].
Choose whether to enable or disable the account.
[ON] will enable the account.
[OFF] will disable the account. With this account, you cannot connect to
an HTTP server that requires authentication or operate the projector using
the [AUTH. PC CONTROL] function.
Delete the USER NAME and PASSWORD that have been set at [ACCOUNT].
NOTE:
• If the [USER1], [USER2], and [USER3] accounts have all been deleted,
you cannot connect to the HTTP server that requires authentication or
operate the projector using the [AUTH. PC CONTROL] function.
135
5. Using On-Screen Menu
Up to 16 alphanumeric
characters
Up to 16 alphanumeric
characters
Up to 16 alphanumeric
characters
—
—
Up to 10 alphanumeric
characters