Calling up a signal from the Entry List [
1. Press the ▲ or ▼ button to select a signal and press the ENTER button.
Editing a signal from the Entry List [
1. Press the ▲ or ▼ button to select a signal you wish to edit.
2. Press the ◀, ▶, ▲, or ▼ button to select [
The [EDIT] window will be displayed.
SOURCE NAME
INPUT
LOCK
SKIP
3. Set the above items and select [OK] and press the ENTER button.
NOTE:
• The input terminal cannot be changed to the currently projected signal.
Enter a signal name. Up to 18 alphanumeric characters can be used.
The input terminal can be changed. Switching between HDMI1/HDMI2/HDBaseT/SDI is pos-
sible.
Set so that the selected signal cannot be deleted when [
changes made after LOCK execution cannot be saved.
Set so that the selected signal will be skipped during auto search.
89
(LOAD)]
(EDIT)]
(EDIT)] and press the ENTER button.
5. Using On-Screen Menu
(ALL DELETE)] is executed. The