Connecting Several Projectors - NEC NP-PA1004UL-W User Manual

6-4. Connecting several projectors

It enables to project HDMI, DisplayPort, HDBaseT image on several projectors connecting the HD-
BaseT IN/Ethernet port and the HDBaseT OUT/Ethernet port by LAN cable. The projectors support
same brightness can be connected up to four units.
HDBaseT OUT/Ethernet
Master projector
HDBaseT IN/Ethernet
Other projector
NOTE:
• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connected before inputting
video signals into this device. The HDBaseT OUT/Ethernet port of the projector is equipped with repeater function. When a device
is connected to the HDBaseT OUT/Ethernet port, the resolution of the output signal is limited by the resolution supported by the
connected device.
• The signal from the COMPUTER IN terminal is not output from the HDBaseT OUT/Ethernet port of this projector.
• Connecting and disconnecting an LAN cable or selecting another input source on the second and subsequent projectors will disable
the HDBaseT repeater function.
• This projector is not guaranteed to work correctly in the connection with an other device as a monitor.
6. Connecting to Other Equipment
167