Connecting Several Projectors - NEC NP-PA703UL User Manual

Connecting several projectors

It enables to project HDMI, DisplayPort, HDBaseT image on several projectors connecting the HDBaseT IN/Ethernet
port and the HDBaseT OUT/Ethernet port by LAN cable. The projectors support same brightness can be connected
up to four units,
HDBaseT IN/Ethernet
• The signal from the COMPUTER IN terminal is not output from the HDBaseT OUT/Ethernet port of this projector.
• PA803UL, PA703UL, and PA653UL can not be connected together. At the same time, this projector is not guaran-
teed to work correctly in the connection with an other device as a monitor.
• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connected
before inputting video signals into this device. The HDMI output terminals of the projector are equipped with repeater
functions. When a device is connected to the HDMI output terminal, the resolution of the output signal is limited by
the resolution supported by the connected device.
• Connecting and disconnecting an HDMI cable or selecting another input source on the second and subsequent
projectors will disable the HDMI repeater function.
HDBaseT OUT/Ethernet
Master projector
Other projector
6. Connecting to Other Equipment
147